- Intro
-
Introduction to NAVINIC 10® and NAVINIC 30®
- Chemical composition, Comparison table of international standards
- Physical properties, Mechanical properties
- Maximum permissible stress, Working pressures, Breaking pressures
- Corrosion behaviour
- Recommendations, Handling and storage instructions
- Welding instructions
-
- Pipes
-
European Standard
- DIN standards and similar
- EEMUA standard
US STANDARDS
-
- Bars
-
Metric sizes
- Rounds, Hexagones, Flats, Squares
Imperial sizes
- Rounds, Hexagones
-
- Butt weld fittings
-
European Standards
-
- Flanges
-
European Standards
-
US Standards
-
-
- Machined fittings
-
Machined fittings - socket welding or capillary ends
-
pipes - european standards
Material :
NAVINIC 10® CuNi10Fe1Mn
NAVINIC 30® CuNi30Fe1Mn
Dimension :
DIN and similar
| OD | 10 BAR | 14 BAR | ||||
|---|---|---|---|---|---|---|
| Nominal | Actual | WT | THEORETICAL WEIGHT | WT | THEORETICAL WEIGHT | |
| inch | ND | mm | actual mm | kg/m | actual mm | kg/m |
| SEAMLESS | ||||||
| 1/8 | 10 | 1 | 0,25 | 1 | 0,25 | |
| 1/4 | 12 | 1 | 0,31 | 1 | 0,31 | |
| 3/8 | 10 | 16 | 1 | 0,42 | 1 | 0,42 |
| 1/2 | 15 | 20 | 1 | 0,53 | 1 | 0,53 |
| 3/4 | 20 | 25 | 1,5 | 0,99 | 1,5 | 0,99 |
| 1 | 25 | 30 | 1,5 | 1,20 | 1,5 | 1,20 |
| 1 1/4 | 32 | 38 | 1,5 | 1,54 | 1,5 | 1,54 |
| 1 1/2 | 40 | 44,5 | 1,5 | 1,81 | 1,5 | 1,81 |
| 2 | 50 | 57 | 1,5 | 2,34 | 1,5 | 2,34 |
| 2 1/2 | 65 | 76,1 | 2 | 4,16 | 2 | 4,16 |
| 3 | 80 | 88,9 | 2 | 4,88 | 2,5 | 6,07 |
| 4 | 100 | 108 | 2,5 | 7,41 | 2,5 | 7,41 |
| 5 | 125 | 133 | 2,5 | 9,16 | 3 | 10,95 |
| 6 | 150 | 159 | 2,5 | 10,99 | 3 | 13,14 |
| 7 | 175 | 193,7 | 2,5 | 13,43 | 3,5 | 18,70 |
| 8 | 200 | 219,1 | 3 | 18,21 | 3,5 | 21,19 |
| 10 | 250 | 267 | 3 | 22,24 | 4 | 29,55 |
| 12 | 300 | 323,9 | 4 | 35,94 | 5 | 44,78 |
| 14 | 350 | 368 | 4 | 40,89 | 5,5 | 56,00 |
| 16 | 400 | 419,1 | 4 | 46,63 | 6 | 69,61 |
| SEAMLESS OR WELDED |
||||||
| 18 | 450 | 457,2 | 4 | 50,91 | 6 | 76,03 |
| 20 | 500 | 508 | 4,5 | 63,64 | 6,5 | 91,55 |
| WELDED | ||||||
| 24 | 600 | 610 | 5 | 84,96 | 8 | 135,26 |
| 28 | 700 | 711 | 6 | 118,80 | 9 | 177,45 |
| 32 | 800 | 813 | 6 | 135,99 | 10 | 225,53 |
| 36 | 900 | 914 | 8 | 203,57 | 11 | 278,98 |
Other wall thicknesses are also available upon request.
- Intro
-
Introduction to NAVINIC 10® and NAVINIC 30®
- Chemical composition, Comparison table of international standards
- Physical properties, Mechanical properties
- Maximum permissible stress, Working pressures, Breaking pressures
- Corrosion behaviour
- Recommendations, Handling and storage instructions
- Welding instructions
-
- Pipes
-
European Standard
- DIN standards and similar
- EEMUA standard
US STANDARDS
-
- Bars
-
Metric sizes
- Rounds, Hexagones, Flats, Squares
Imperial sizes
- Rounds, Hexagones
-
- Butt weld fittings
-
European Standards
-
- Flanges
-
European Standards
-
US Standards
-
-
- Machined fittings
-
Machined fittings - socket welding or capillary ends
-