- Intro
-
Introduction to NAVINIC 10® and NAVINIC 30®
- Chemical composition, Comparison table of international standards
- Physical properties, Mechanical properties
- Maximum permissible stress, Working pressures, Breaking pressures
- Corrosion behaviour
- Recommendations, Handling and storage instructions
- Welding instructions
-
- Pipes
-
European Standard
- DIN standards and similar
- EEMUA standard
US STANDARDS
-
- Bars
-
Metric sizes
- Rounds, Hexagones, Flats, Squares
Imperial sizes
- Rounds, Hexagones
-
- Butt weld fittings
-
European Standards
-
- Flanges
-
European Standards
-
US Standards
-
-
- Machined fittings
-
Machined fittings - socket welding or capillary ends
-
Male Plugs - Hexagonal head
Material :
NAVINIC 10® CuNi10Fe1Mn
NAVINIC 30® CuNi30Fe1Mn
| Outside diameter of pipe ØD |
ØE Thread NPT |
B | C | C.A/f | THEORETICAL WEIGHT |
|---|---|---|---|---|---|
| Nominal | |||||
| inch | inch | mm | mm | mm | kg/piece |
| 1/2 | 1/2 | 8 | 14,5 | 22 | 0,17 |
| 3/4 | 3/4 | 10 | 16 | 27 | 0,3 |
| 1 | 1 | 10 | 19 | 35 | 0,55 |
| 1 1/4 | 1 1/4 | 14 | 20,5 | 44,5 | 0,95 |
| 1 1/2 | 1 1/2 | 16 | 20,5 | 51 | 1,1 |
| 2 | 2 | 17 | 22 | 63,5 | 1,85 |
Threads other than NPT are also available on request.
Other dimensions, wall thicknesses and outside diameters are also available on request.
Also available in US dimensions
- Intro
-
Introduction to NAVINIC 10® and NAVINIC 30®
- Chemical composition, Comparison table of international standards
- Physical properties, Mechanical properties
- Maximum permissible stress, Working pressures, Breaking pressures
- Corrosion behaviour
- Recommendations, Handling and storage instructions
- Welding instructions
-
- Pipes
-
European Standard
- DIN standards and similar
- EEMUA standard
US STANDARDS
-
- Bars
-
Metric sizes
- Rounds, Hexagones, Flats, Squares
Imperial sizes
- Rounds, Hexagones
-
- Butt weld fittings
-
European Standards
-
- Flanges
-
European Standards
-
US Standards
-
-
- Machined fittings
-
Machined fittings - socket welding or capillary ends
-